ARM, CONTROL (LOWER) {FRONT LH OR REAR RH} [259025 AND ABOVE]

On Sale: $381.30 MSRP: $733.33

FSC - NIIN

2530-01-554-8336

EXTRA DETAILS H1 VS SURPLUS? FITMENT HUMMER H1 FITMENT GOVT SURPLUS RELATED

IMPORTANT PART NOTE:

NO ADDITIONAL DETAILS AVAILABLE AT THIS TIME

IMPORTANT PART NOTE:

7/16" HOLE

HPG ETM (ELECTRONIC TECH MANUAL) LOCATIONS - IF AVAILABLE. CLICK ON THE LINK TO VIEW A VISUAL LOCATION FOR THAT ITEM.


HUMMER PARTS > SUB-ASSEMBLIES > AXLES & SUSPENSION > CONTROL ARMS > ASSEMBLIES
HMMWV PARTS > SUB-ASSEMBLIES > AXLES & SUSPENSION > CONTROL ARMS > ASSEMBLIES
HPG ETM > HUMMER > 1992 6.2L DIESEL > AXLES, GEARED HUBS, HALFSHAFTS AND PROPELLER SHAFTS > CONTROL ARMS AND BALL JOINTS
HPG ETM > HUMMER > 1993 6.2L DIESEL > AXLES, GEARED HUBS, HALFSHAFTS AND PROPELLER SHAFTS > CONTROL ARMS AND BALL JOINTS
HPG ETM > HMMWV > 6.5L TURBO DIESEL > FRONT AXLE > 114 - FRONT CONTROL ARMS, BALL JOINTS AND MOUNTING HARDWARE
HPG ETM > HMMWV > 6.5L TURBO DIESEL > REAR AXLE > 120 - REAR CONTROL ARMS BALL JOINTS AND MOUNTING HARDWARE

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS.

---

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS. HOVER OVER THE MODEL TO SEE ADDITIONAL DETAILS

---

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

12480554-1 / 01-554-8270

ARM, CONTROL (LOWER) {FRONT RH OR REAR LH} [259025 AND ABOVE]

In Stock @ HPG (PA Warehouse)

$872.87

View Details

---

Do I have a Hummer H1 or Surplus HMMWV(R)? Does it really matter...

Answer: YES

While some parts will fit either chassis there are certain unique parts and if you incorrectly interchange them THEY WILL NOT FIT. (pause and re-read that again)

The key difference, and it makes the whole experience better in buying and owning your vehicle, starts with the VIN or SERIAL Number. KNOW WHAT YOU OWN. You do NOT own a 1989 Hummer H1...you own a 1989 HMMWV®. You do NOT own a 2004 M1123 Hummer H1..you own a 2004 M1123. So knowing you have a surplus HMMWV® or Hummer H1 you can now properly get the correct fan clutch (because there are 4 clutch options)...get it?

Hummer H1: Vin starts with 137# (#= D, F, L, P, X, Y OR Z ) Total of 17 digits. Example 137YA8338TE123456. Vin is located on the windshield frame, frame rail and door frame. This vehicle was DOT certified/crash tested, is ONLY 12V and meant for the highway/offroad.

Surplus HMMWV(R)): Serial numbers are 6 numeric digits located on the driver door data plate, next to the body style tag MXXXX. (Example: 125611, M998). Unless you are armed forces this is a military surplus vehicle, is ONLY 24V from the factory and meant for battle.