FILTER, FUEL (H1) [STANADYNE]

On Sale: $43.79 MSRP: $51.14

EXTRA DETAILS H1 VS SURPLUS? TECH HOW TO FITMENT HUMMER H1 RELATED

IMPORTANT PART NOTE:

NO ADDITIONAL DETAILS AVAILABLE AT THIS TIME

IMPORTANT PART NOTE:

OEM STYLE REQUIRES SEPARATE FILTER NUT IF MISSING PN# 5742599 (THE AFTERMARKET INTEGRATED FILTER/NUT COMBO LEAKS AIR)
CHANGE EVERY 12,000 MILES
NOT FOR GAS ENGINES

HPG ETM (ELECTRONIC TECH MANUAL) LOCATIONS - IF AVAILABLE. CLICK ON THE LINK TO VIEW A VISUAL LOCATION FOR THAT ITEM.


ON SALE
HPG ETM > HUMMER > 1992 6.2L DIESEL > FUEL EMISSIONS EXHAUST > 313 - FUEL MANAGER ASSEMBLY
HPG ETM > HUMMER > 1993 6.2L DIESEL > FUEL EMISSIONS EXHAUST > FUEL MANAGER ASSEMBLY
HPG ETM > HUMMER > 1994 6.5L DIESEL > FUEL EMISSIONS EXHAUST > FUEL MANAGER ASSEMBLY

Removal

1. Loosen fuel filler cap to release pressure from fuel tank
2. Remove retaining nut and filter element from filter body assembly. Use oil filter-type strap wrench if necessary. Discard filter element

NOTE: It is not necessary to drain the fuel from the filter body assembly to change the filter element. Fuel will remain in the filter body assembly cavity.

Installation

NOTE: Be sure filter element mating surface in filter body assembly is clean before installing filter element.

1. Align widest key of filter element with widest key slot of filter body assembly and install filter element in filter body assembly
2. Install retaining nut on filter body assembly. Tighten retaining nut to 115-120 lb-in. (13-14 N•m).
3. Bleed air from fuel.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS.

---

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS. HOVER OVER THE MODEL TO SEE ADDITIONAL DETAILS

---

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

5742599

NUT, FUEL FILTER HOUSING (TOP FILTER)

In Stock @ HPG (WI Warehouse)

$13.67

View Details

---

Do I have a Hummer H1 or Surplus HMMWV(R)? Does it really matter...

Answer: YES

While some parts will fit either chassis there are certain unique parts and if you incorrectly interchange them THEY WILL NOT FIT. (pause and re-read that again)

The key difference, and it makes the whole experience better in buying and owning your vehicle, starts with the VIN or SERIAL Number. KNOW WHAT YOU OWN. You do NOT own a 1989 Hummer H1...you own a 1989 HMMWV®. You do NOT own a 2004 M1123 Hummer H1..you own a 2004 M1123. So knowing you have a surplus HMMWV® or Hummer H1 you can now properly get the correct fan clutch (because there are 4 clutch options)...get it?

Hummer H1: Vin starts with 137# (#= D, F, L, P, X, Y OR Z ) Total of 17 digits. Example 137YA8338TE123456. Vin is located on the windshield frame, frame rail and door frame. This vehicle was DOT certified/crash tested, is ONLY 12V and meant for the highway/offroad.

Surplus HMMWV(R)): Serial numbers are 6 numeric digits located on the driver door data plate, next to the body style tag MXXXX. (Example: 125611, M998). Unless you are armed forces this is a military surplus vehicle, is ONLY 24V from the factory and meant for battle.