5745239 - SHIM, SPEED SENSOR | Hummer Parts Guy (HPG)

Image 1

Shop with Confidence Online. Orders Processed Safely & Securely

Customer Focused Technical and Service Support for over 15 Years

Tens of Thousands of Parts in Stock at the HPG Warehouse NEVER USED

Fast and Safe Shipping with FedEx Ground, Express and International

5745239

SHIM, SPEED SENSOR

Your Price: $5.99

Qty in Stock
Condition: NEW
Unit of Measure: EACH
Brand
Package Note: This item ships in its own box
Handling Note: This part requires a special $0 handling for each item
Part Fitment?: Click tab below for unique model details
Important Note!: Click tab below for Important or additional notes

Reorder Alert: Reorder QTY Not Set, Please Tell HPG!

Question about this item? Ask here...

IMPORTANT PART NOTE:

NO ADDITIONAL DETAILS AVAILABLE AT THIS TIME

ADDITIONAL PART NOTE:

AM General has developed with a shim that goes under the sensor to space it out a bit from the rotor. Owners that had light wear on the end of the sensor and were having intermittent problems with the truck going into limp home mode reported the problem solved when they installed the shim. The speed sensor is magnetic so it picks up particles from inside the transfer case. Occassionally it needs to be cleaned. MAKE SURE YOU REMOVE O-RING AND THEN INSTALL SHIM

HPG ETM (ELECTRONIC TECH MANUAL) LOCATIONS - IF AVAILABLE. CLICK ON THE LINK TO VIEW A VISUAL LOCATION FOR THAT ITEM.

[CATEGORY_BREADCRUMBS]

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS.

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS. HOVER OVER THE MODEL TO SEE ADDITIONAL DETAILS

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

6018698

SENSOR, SPEED (TRANSFER CASE)

In Stock @ HPG (WI Warehouse)

~~$118.05~~ $82.28

View Details

Do I have a Hummer H1 or Military Humvee? Does it really matter...

Answer: YES

While some parts will fit either chassis there are certain unique parts and if you incorrectly interchange them THEY WILL NOT FIT. (pause and re-read that again)

The key difference, and it makes the whole experience better in buying and owning your vehicle, starts with the VIN or SERIAL Number. KNOW WHAT YOU OWN. You do NOT own a 1989 Hummer H1...you own a 1989 Humvee. You do NOT own a 2004 M1123 Hummer H1..you own a 2004 M1123 Humvee. So knowing you have a 1996 Humvee or 1996 Hummer H1 you can now properly get the correct fan clutch (because there are 4 clutch options)...get it?

Hummer H1: Vin starts with 137# (#= D, F, L, P, X, Y OR Z ) Total of 17 digits. Example 137YA8338TE123456. Vin is located on the windshield frame, frame rail and door frame. This vehicle was DOT certified/crash tested, is ONLY 12V and meant for the highway/offroad.

Military Humvee: Serial numbers are 6 numeric digits located on the driver door data plate, next to the body style tag MXXXX. (Example: 125611, M998). Unless you are armed forces this is a military surplus vehicle, is ONLY 24V from the factory and meant for battle.

SHIM, SPEED SENSOR

PART INVESTIGATION:

HMMWV PART NOTICE:

LEADTIME PART NOTICE:

OBSOLETE PART NOTICE:

REPLACEMENT PART NOTICE:

IMPORTANT PART NOTE:

ADDITIONAL PART NOTE: