12460230 / 01-410-8789 / 2540-01-410-8789 - SWITCH, BRAKE LIGHT (DUAL LEVER 4 SPEED) [AMG]

SWITCH, BRAKE LIGHT (DUAL LEVER 4 SPEED) [OEM]

This electrical switch is used to indicate brake pedal status. This switch is normally closed when the brake pedal is not applied. When the brake pedal is applied, the switch will open, changing the signal to the control module. The TCM uses this signal to de-energize the TCC solenoid when the brake pedal is applied. The brake switch is located on the brake pedal mounting bracket.

To ensure correct adjustment of the stop light switch, the engine should be running, hand brake applied and wheels chocked. With the engine running, sufficient hydro-boost pressure is applied to the master cylinder, requiring less brake pedal application, and providing a more precise actuation of the brake light circuit. When the brakes are applied, a 24 volt DC signal is transmitted to the stop lights. This switch is normally open when the brake is released. This switch is a two section device, one side, 24 volts for brake light operation and the other side,12 volts for torque converter clutch (TCC) operation. The TCC (12 volt) side of the switch is normally closed when the brake pedal is released. This switch applies 12 volts DC to the transmission control module (TCM) signal line. When the brake is applied, this switch opens, breaking the electrical circuit to the TCM creating a zero voltage signal to the TCM causing the torque converter clutch (TCC) to be released.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS.

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS. HOVER OVER THE MODEL TO SEE ADDITIONAL DETAILS

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

12460229 / 01-444-5640

CONNECTING LINK, BRAKE LIGHT SWITCH

In Stock @ HPG (WI Warehouse)

View Details

HPG ETM (ELECTRONIC TECH MANUAL) LOCATIONS - IF AVAILABLE. CLICK ON THE LINK TO VIEW A VISUAL LOCATION FOR THAT ITEM.

[CATEGORY_BREADCRUMBS]

IMPORTANT PART NOTE:

NO IMPORTANT NOTE AVAILABLE AT THIS TIME

IMPORTANT PART NOTE:

AFTERMARKET SWITCHES HAVE DEAD SPOTS IN THEM

12460230 / 01-410-8789

SWITCH, BRAKE LIGHT (DUAL LEVER 4 SPEED) [OEM]

On Sale: $209.99 MSRP: $226.09

Qty in Stock
Condition: NEW
Country of Origin: US
Unit of Measure: EACH
Part Source
Package Note: This item ships in its own box
Handling Note: This part requires a special $0 handling for each item
Part Fitment?: Click "Fits" tab(s) for more information
Important Note!: Click "Details" tab for more information

Reorder Alert: Reorder QTY Not Set, Please Tell HPG!

12460230 / 01-410-8789

SWITCH, BRAKE LIGHT (DUAL LEVER 4 SPEED) [OEM]

Existing list:

New list:

Question about this item? Ask here...

Shop with Confidence Online. Orders Processed Safely & Securely

Customer Focused Technical and Service Support for over 17 Years

Tens of Thousands of OEM Parts in Stock at the HPG Warehouses

Fast and Safe Shipping with FedEx Ground, Express and International

EXTRA DETAILS NOTE:

IMPORTANT HPG ETM NOTE:

IMPORTANT PART NOTE:

IMPORTANT PART NOTE:

SWITCH, BRAKE LIGHT (DUAL LEVER 4 SPEED) [OEM]

PART INVESTIGATION:

PART NOTICE:

LEADTIME PART NOTICE:

OBSOLETE PART NOTICE:

REPLACEMENT PART NOTICE: