5740033 / 01-149-7859

Image is for representation purposes only. Questions ask us...
Click the tabs above for additional fitment and details

REMOVAL PROCESS

1. Remove crankshaft pulley and serpentine belt.

2. Remove damper bolt and washer

3. Remove torsional damper with tool

4. Remove and inspect crankshaft keys. Replace keys if worn, chipped, or distorted.

INSTALLATON PROCESS

1. Check seal contact surface of damper. Surface must be clean and smooth to avoid damaging timing cover seal. Smooth surface with 180 grit emery if necessary. Then polish surface with 220 grit emery coated with engine oil.

2. Inspect condition of front cover seal. Replace seal if worn, cut, cracked, or hardened.

3. Install damper drive key in crankshaft. Be sure keys are fully seated in crankshaft key slots.

4. Lubricate crankshaft nose, front cover seal, and seal surface of torsional damper with engine oil.

5. Install torsional damper on crankshaft. Be sure drive key is not displaced during damper installation.

6. Install damper washer and bolt. Tighten bolt to 160-200 lb-ft (217-270 Nm) torque.

7. Install crankshaft pulley. Tighten pulley bolts to 48 lb-ft (65 Nm) torque.

8. Install belt.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS.

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

BELOW ARE THIS PART'S MATCHED USED ON CODES (UOC) TO DETERMINE PROPER FITMENT. THESE CODES ARE CONSTANTLY BEING UPDATED. CONTACT US IF YOU HAVE QUESTIONS. HOVER OVER THE MODEL TO SEE ADDITIONAL DETAILS

NOTE: Part data was compiled by HPG. Please don't copy it for eBay listings, your website or anything else. Karma will hunt you down if you decide to copy it.

5740033 / 01-149-7859

BALANCER, CRANKSHAFT [6.2L] *XREF AVAIL*

Contact for Availability

View Details

HPG ETM (ELECTRONIC TECH MANUAL) LOCATIONS - IF AVAILABLE. CLICK ON THE LINK TO VIEW A VISUAL LOCATION FOR THAT ITEM.

[CATEGORY_BREADCRUMBS]

TAKEOFF PART NOTE:

ITEM REMOVED FROM CHASSIS ON SITE AT HPG. PHOTO FOR REPRESENTATION ONLY, ACTUAL ITEM MAY BE PAINTED GREEN, TAN OR BLACK CARC, PART SOLD AS IS. ITEM IS SERVICEABLE/USABLE IN CURRENT CONDITION NO WARRANTY IS IMPLIED WITH PART SALE FOR TAKEOFF PARTS

IMPORTANT PART NOTE: (NONE AVAILABLE AT THIS TIME)

CLICK THE TABS ABOVE FOR ADDITIONAL FITMENT AND DETAILS

5740033 / 01-149-7859

BALANCER, CRANKSHAFT [6.2L] XREF AVAIL

INTERCHANGE

Qty in Stock
Condition: NEW
Country of Origin
Bill of Material: BOM Parts List
Unit of Measure: EACH
Part Source
Package Note: This item ships in its own box
Handling Note: This part requires a special $0 handling for each item
Part Fitment?: Click "Fits" tab(s) for more information
Important Note!: Click "Details" tab for more information

Reorder Alert: Reorder QTY Not Set, Please Tell HPG!

BALANCER, CRANKSHAFT [6.2L] XREF AVAIL

Existing list:

New list:

Question about this item? Ask here...

Shop with Confidence Online. Orders Processed Safely & Securely

Customer Focused Technical and Service Support for over 17 Years

Tens of Thousands of OEM Parts in Stock at the HPG Warehouses

Fast and Safe Shipping with FedEx Ground, Express and International

EXTRA DETAILS NOTE:

IMPORTANT HPG ETM NOTE:

TAKEOFF PART NOTE:

IMPORTANT PART NOTE: (NONE AVAILABLE AT THIS TIME)

BALANCER, CRANKSHAFT [6.2L] XREF AVAIL

PART INVESTIGATION:

PART NOTICE:

LEADTIME PART NOTICE:

OBSOLETE PART NOTICE:

FREE PART INTERCHANGE:

REPLACEMENT PART NOTICE: